How To Remove Sink Drain Cover. First, examine the floor drain cover to see whether it's set into the floor or screwed in. The final step is using a putty knife to lift the flange from the hole.
Flip the securing nut beneath the sink counterclockwise with the pipe wrench. Take your flathead screwdriver and pop the piece off. That's when you notice the water doesn't drain as fast as before.
Pull The Nut Away From The House Drain.
While it could be a clog, it also could be your clogged sink stopper. How do you remove a stuck sink drain pipe? In either case, you'll want to apply rust remover and/or lubricant around the edges of the drain cover and allow it to soak in.
Using The Correct Equipment, You Will Push The Flange Up From The Bottom.
If the nut is very tight, hold the strainer in place from above with the pliers while you loosen it. Flip the securing nut beneath the sink counterclockwise with the pipe wrench. You should first try to find the drain cover.
The Final Step Is Using A Putty Knife To Lift The Flange From The Hole.
Posted on august 19, 2020 by hls_admin. Turn the nut counterclockwise until it turns by hand. To remove the flange, you’ll have to access the drain pipe from the bottom.
0 Votes And 1 Comment So Far On Reddit
First, examine the floor drain cover to see whether it's set into the floor or screwed in. Take your flathead screwdriver and pop the piece off. The first thing to do is loosen the coupling nut connecting the strainer to the drain pipe, which you can usually do by hand.
It's Common For Moen Sink Stoppers To Be Attached To A Lever, So You'll Need To Do Some Work Under The Sink To Disassemble The Sink Stopper Mechanism.
Remove items from under the sink. Sinks can have a lot to drain, such as soap, toothpaste and other debris that might clog them. Place the sharp end of a chisel against one of the.